TX-110, dot-matrix serial printer

The rear panel ioniser is an accessory that can be easily assembled on the rear of the wind-shield of the already owned BEL Engineering balance.
Using a ioniser is strongly recommended especially with balance with resolution of 0,01 mg or everywhere is required the assurance that the sample is free of static charges to get accurate measurements.
Static charges accumulate in many kind of samples that are being weighed during the laboratory routine. By blowing ions the static electricity is neutralized on charged samples like plastic parts, containers or films. Within seconds the sample is ready to be weighted free from static charges giving  the operator accurate results.

Can be used for balances with 3 glass window-shield, resolution 0,01 mg 0,1 mg 1 mg

TLP-50 printer is a compact printer that can be used with BEL laboratory balances. This printer has internal clock so it can print date/time together with weight values.
Paper type is label

The structure of TAV is made of two separate metal steel frame. The outer structure aim to isolate the working area and the inner structure holds the granite slab.

The granite slab is held by four high performance  special dumpers. The structure is made of powder-coated steel supported by vibration absorption feet and the table top is made by high resistant phenolic laminate.

High resolution measuring instruments such as micro balances or semi-micro balances may be susceptible to errors caused by vibrations or shocks in the environment.
With this granite slab especially developed by BEL, the vibrations can be greatly reduced thanks to high perfomance bumpers, giving the comfort of higher accuracy results. It’s highly recommended to use an anti-vibration device such this when operating high accuracy instruments such as balances, microscopes, viscometers etc…

Portable Li-Ion rechargeable power bank. Can connect and power balances S, L, LW, LG, LGW, RB, RBG series.
(picture may be different from the real product)