 |
TLP-50 printer is a compact printer that can be used with BEL laboratory balances. This printer has internal clock so it can print date/time together with weight values.
Paper type is label
Contact Us| Code: | C054 |
|---|
| Type | Line thermal dot printing |
|---|---|
| Print width | 54mm (432 dots) |
| Print resolution | 203 x 203 dpi |
| Print speed | 50mm/sec |
| Prints | Date/time |
| Paper type | Thermal paper rolls |
| Paper roll | Width 58mm |
| External power supply unit (included) | AC 100-240 V, 50/60 Hz, DC 12V /2.5A |
| Interface | RS-232C |
| Operating temperature | 5 - 40°C |
| Humidy | Max 85% relative (not condensing) |
| Dimensions | 106 x 184 x 110h mm |
| Weight | 950g (incl. power supply) |
| Connection cable | Included |
How to install the printer to the balance
Procedure per connettere la stampante alla bilancia
Contact Us
TX-110 is a high-speed dot-matrix printer suitable for long-term data retention. It is compliant with ISO/GLP procedures, it is equipped with a bright OLED display and has various operating modes:
• DIRECT. Prints out current weight value
• TARE/NET/GROSS. Prints out these values separately
• SUM. Prints out the total value of samples
• AVERAGE. Prints out the average of samples
• FORMULATION. Print out each sample’s weight independently when mixing samples
• PIPETTE CALIBRATION. Calibrate capacity of pipette
• USER DEFINED. Operator can set a multiplicative coefficient
• COMPARATOR. Prints out weight value only when inside a defined range
• AUTOMATIC TIMING. Prints out weight value at defined time intervals
Complete kit to connect BEL balances to a computer. It allows data collection, Statistics, creation of graphs and export results to Excel file.
The software inluced allows to perform all the functions of the balance from the PC such as Piececount, Density, Peak hold, Limits set etc…from your computer.
Operating systems: Windows 7, 8, 10 (32&64bit)
NOT compatible with BEL balances series M5-Thermo, i-Thermo
The rear panel ioniser is an accessory that can be easily assembled on the rear of the wind-shield of the already owned BEL Engineering balance.
Using a ioniser is strongly recommended especially with balance with resolution of 0,01 mg or everywhere is required the assurance that the sample is free of static charges to get accurate measurements.
Static charges accumulate in many kind of samples that are being weighed during the laboratory routine. By blowing ions the static electricity is neutralized on charged samples like plastic parts, containers or films. Within seconds the sample is ready to be weighted free from static charges giving the operator accurate results.
Can be used for balances with 3 glass window-shield, resolution 0,01 mg 0,1 mg 1 mg
Small, fast-response thermometer for verify and calibrate the heating source of BEL moisture Analyzers i-Thermo & M5-Thermo series. A calibrated moisture analyzer’s heater allows to have always accurate results. Essential for application where are required certified results.
Portable Li-Ion rechargeable power bank. Can connect and power balances S, L, LW, LG, LGW, RB, RBG series.
(picture may be different from the real product)
